Effect of immediate and delayed finishing and polishing procedure on Streptococcal mutans adhesion and micro-hardness of composite resin surface: An in-vitro study

---

Original Article

Author Details : Moumita Khatua, Tushar Kanti Majumdar*, Paromita Mazumdar, Sayantan Mukherjee

Volume : 10, Issue : 1, Year : 2022

Article Page : 5-10

https://doi.org/10.18231/j.idjsr.2022.002

Suggest article by email

Get Permission

---

Abstract

Background: Proper finishing and polishing have become the indispensable step in clinical restorative dentistry due to increased aesthetic demands. There are several polishing systems containing fine particle size abrasives. The adhesion of bacterial plaque to restoration depends on the surface properties and composition of materials. In literature, surface roughness after polishing is well documented, but the timing, i.e., immediate or delayed polishing affecting the bacterial adherence and microhardness on the composite needs research. As the Streptococcus mutans has a major role in primary and secondary caries, so in this light, this study is conducted to investigate the best timing of polishing affecting the bacterial adhesion and microhardness of composite resin.
Aim: To evaluate the Streptococcal mutans adhesion and microhardness of composite resin after polishing them, immediately and after 24 hours of curing.
Materials and Methods : Sixty specimens were made from composite resin Filtek Z 350 XT (3M ESPE) of 6mm diameter and 4mm height, was cured by placing a Mylar strip and divided into 3 groups- Group 1 the control group with only MYLAR-STRIP, Group 2- Polishing system SOF-LEX (3M ESPE Dental products St. Paul, MN,USA.) Group 3- Polishing with SUPER-SNAP (Shofu Inc., Kyoto, Japan). Group 2 and 3 were further divided into two subgroups according to the polishing time- immediate and delayed. The Streptococcal mutans adhesion for each group was measured by colony forming units and compared. The mean log of CFU/mL present in the biofilm was also calculated.
Statistical analysis: The results of bacterial adherence was analysed by three-way ANOVA (analysis of variance) (p<0> Polishing after 24 hours of curing showed less bacterial adherence on the composite surface, regardless of the polishing treatment performed(p<0> Conclusion: SOF-LEX system can be used for chairside polishing of composite restorations in clinic and delayed finishing and polishing of composite shows better surface microhardness values.
 

Keywords: Streptococcal mutans, Adhesion, Microhardness, Finishing and Polishing

How to cite : Khatua M, Majumdar T K, Mazumdar P, Mukherjee S, Effect of immediate and delayed finishing and polishing procedure on Streptococcal mutans adhesion and micro-hardness of composite resin surface: An in-vitro study. Int Dent J Stud Res 2022;10(1):5-10

This is an Open Access (OA) journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 License, which allows others to remix, tweak, and build upon the work non-commercially, as long as appropriate credit is given and the new creations are licensed under the identical terms.